4ga Amplifier Wiring Kit (While supplies last)


MSRP: $48.95
(You save $23.95 )
(No reviews yet) Write a Review
Usually Ships Within 1-2 Business Days
Minimum Purchase:
1 unit
Maximum Purchase:
50 units
Power Cable:
17FT 4AWG CCA Q-Flex Power Cable
Ground Cable:
3FT 4AWG CCA Q-Flex Ground Cable
Speaker Wire:
17FT 12AWG CCA Q-Flex Speaker Cable
Remote Wire:
17FT Remote Turn on Wire
17FT Q-Flex Braided OFC RCA Cable
High Current ANL Fuse Holder with 100amp Fuse

Out of stock

The SQ-AK-4 4AWG and SQ-AK-0 1/0 amplifier kits are the Piece De Resistance to finish your SoundQubed build. These kits come with CCA true gauge wire wrapped in our translucent Q-Flex insulator and include 17 feet of Q-Flex power cable in either 4 or 1/0 AWG, with 17 feet of either 10 or 12 gauge speaker wire and 3 feet of ground cable in 4 or 0/1 AWG.

An included 17 foot remote turn on wire and 17 foot braided RCA Cable deliver steady power and a clean audio signal from your amplifier to your new SoundQubed tweeters, coaxials, components, and Subwoofers. To help keep your wires in working order for years to come, your new Amp Wiring Kit includes either a 2 foot or 3 foot Wire Loom.

A 100 Amp or 250 Amp fuse will come with your kit, as well as a High Current ANL Fuse Holder and all the necessary accessories like zip ties, grommet, rubber crimp sheaths and gold plated eyelets. True gauge wire represents a thickness at or above 0.2043 inches for the 4 Gauge Kit and 0.325 inches for the 1/0 Gauge Kit.

The 4 Gauge Amp Kit was specifically designed with high power in mind. Coupled our Q1-1200.2, Q4-150 or any amplifier up to 2,000W this kit will make your install complete!

The 0/1 Gauge Kit was specifically designed with flexibility in mind. Coupled with our Q1-2200 or Q1-6000, this kit will make your install complete!

SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty