BUNDLE & SAVE S4-100 and S1-2250 Amplifiers


(No reviews yet) Write a Review
Usually Ships Within 1-2 Business Days
Minimum Purchase:
1 unit
Power Handling S4-100:
100 Watts @ 4 ohms X 4 Channels
Power Handling S1-2250:
2250 Watts @ 1 Ohm x 1 Channel
S4-100 Input:
4 Gauge Power/Ground
S1-2250 Input:
0 Gauge Power/Ground

Out of stock


This listing is for the S4-100 and S1-2250 Amplifiers. When you are in need of budget friendly, beautiful amplifiers in a compact design; look no further. That's what these amplifiers were meant to be when it comes to getting some bass, and some louder mids and highs to throw that stock vehicle equipment out the window. 


Model S1-2250
Class Class D
Channels 1 Channel
Working Voltage 8.5 V - 16 V
Maximum Amperage 225 Amps
Power @ 4 Ohm 14.4V 800 Watts RMS
Power @ 2 Ohm 14.4V 1300 Watts RMS
Power @ 1 Ohm 14.4V 2300 Watts RMS
Frequency Response 10 Hz - 200 Hz
S/N Ratio Greater than 80
Damping Factor Greater than 100
Input Sensitivity 5 V - 0.15 V
Subsonic Filter 10 Hz - 50 Hz
Low-Pass Filter 20 Hz - 200 Hz
Dimensions in (LxWxH) 19.6 x 7.8 x 2.2
SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty