HDS3.1 | Power Band 1200 Watts

Disclaimer:  This subwoofer requires at least 24 hours PLAYING time to break the subwoofer in. If it is not broke in properly the subwoofer can be damaged. All of our subwoofers are AGE tested for an hour before going into stock.

The Heavy Duty Street 3.1 Series is built to handle 1200 Watts RMS.  The dual magnet motor  features a bumped t-yoke to allow for more travel. The motor hosts a powder-coated stamped frame and comes with a three piece spider system that is a bit softer to allow for lower tuning and better performance.  The HDS3.1 line can be utilized in any DIY install including sealed, ported, and bandpass installs.

HDS3.1 Features Include:

Green double stitched EROM surround.
Stamped powder coated frame.
Vented back-plate for optimal cooling and less turbulence in the coil gap.
3.0″ diameter four-layer copper coil.
Conical back plate to allow more voice coil travel.
10 AWG push terminals.
Black electroplated top and bottom plates.
Non-pressed cone for maximum rigidity.
Power Handling 1200W RMS, 2400W Peak.

HDS3.1 Series
RMS Power1200W
Peak Power2400W
Magnet Weight160oz
Coil Diameter3.0"
Coil Length40mm
Usable Throw28mm
Woofer Size10"12"15"
F(s)37 Hz33.65 Hz35 Hz
ImpedanceD2 / D4D2 / D4D2 / D4
Z(max)93.81 Ω73.74 Ω41.3 Ω
V(as)8.328 liters 22.130 liters 67.53 liters
L(e)0.851 mH
8.62 mH
6.06 mH
n(0)0.13 %0.10 %0.56 %
M(ms)235.7 grams
364.40 grams
261 grams
C(ms)0.05 mm/N
0.06 mm/N
0.71 mm/N
Sensitivity 1W/1m83.24 1W/1m
82.29 1W/1m
89 1W/1m
XmaxComing SoonComing SoonComing Soon
SdComing SoonComing SoonComing Soon
Mounting Depth6.6"
Circle Cutout9.31"

Showing all 1 result