0,00 USD

No products in the cart.

Home Mobile Electronics Project Bundles In an Afternoon HDS2.210-D2 Subwoofer, S1-850 Amp, and Amp Kit Bundle

HDS2.210-D2 Subwoofer, S1-850 Amp, and Amp Kit Bundle


Lease-to-own for as low as $0/week. Get Started

  • Single channel
  • 900 Watts RMS @ 1 Ohm
  • Class D
  • 1 Ohm stable
  • 4 AWG power inputs

In stock


In stock


This is the perfect 10 inch sub + amp combo if you’re looking to add some big, loud low end to your audio system. You’ll get 1 HDS2.210-D2 600 W RMS subwoofer, and a single S1-850 amplifier. A 4 AWG amp wiring kit also comes with this bundle so you can hit the ground running with all the wiring and connections you need.

The Dual 2 ohm configuration allows for wiring to a 1 ohm load to take advantage of the full power from your S1-850 monoblock amplifier. The S1-850 is safe to run on most stock electrical charging systems, so you won’t need electrical upgrades for this afternoon project.

The 4 AWG amp kit included with this bundle gives you all the connections you’ll need including CCA power/ground wire, braided OFC RCA cable, remote turn-on wire, 100-amp fuse block, and wire loom. And of course, all the zip ties, grommets, rubber crimp sheaths, eyelets, and other connectors you’ll need to complete your installation.

This is the perfect project bundle if you want to jump into car audio with both feet. Aside from wiring the amplifier to the car’s charging system, you’ll also need an enclosure designed for these subwoofers. There are pre-made options available, but they’ll need to provide the correct amount of airspaceport area, and mounting depth for the HDS2.210. Of course these subs will require break-in to avoid damage and get the best performance.

A 10 inch sub in an enclosure will take up a bit of cargo space, so plan ahead by knowing what space you can spare!

ClassClass D
Channels1 channel
Working Voltage8.5 V - 16 V
Maximum Amperage90
Power @ 4 Ohm 14.4V375 Watts RMS
Power @ 2 Ohm 14.4V625 Watts RMS
Power @ 1 Ohm 14.4V900 Watts RMS
Frequency Response10 Hz - 200 Hz
S/N RatioGreater than 80
Damping FactorGreater than 100
Input Sensitivity5 V - 0.15 V
Subsonic Filter10 Hz - 50 Hz
Low-Pass Filter20 Hz - 200 Hz
Dimensions in (LxWxH)9.8 x 7.8 x 2.2

Additional information

Weight 40 lbs
RMS Power350 W600 W600 W600 W600 W
Peak Power1000 W1200 W1200 W1200 W1200 W
Magnet Weight60 Oz100 Oz100 Oz100 Oz100 Oz
Coil Diameter2"2.5"2.5"2.5"2.5"
Coil Length28 mm36 mm40 mm40 mm40 mm
Woofer Size6.5"8"10"12"15"
F(s)45.39 Hz44.41 Hz33.6530.9526.92
ImpedanceD2 / D4D2 / D4D2 / D4D2 / D4D2 / D4
Z(max)33.8138.77 Ω65.6559.14 Ω56.79
V(as)3.264 L5.319 L17.43 L45.57 L100 L
L(e)1.498 mH5.394 mH5.7456.079 mH6.473
n(0)0.05%0.07673 %0.15860.3046 %0.3058
M(ms)93.7143.8 grams201.7209.2 grams333.1
C(ms)0.1310.089 mm/N0.1110.126 mm/N0.105
Sensitivity 1W/1m79.3280.9584.186.9486.95
Mounting Depth4.125"5.5"6.75"6.75"7.44"
Circle Cutout6.06257.5"9.31"11.25"13.875"
Sealed Enclosure (Cu Ft):.25-.5 FT³.35-.75 Ft³.5-1.0 FT³
.75-1.5 FT³
1.75-2.75 FT³
Ported Enclosure (Cu Ft):
.25-75 Ft³.75-1.25 FT³.75-1.25 FT³
1-1.75 FT³
3-6 FT³