Disclaimer: This amplifier will require an additional charging system to run proficiently. It will run without the additional charging system, but you run the chance of damaging the amplifier and/or not getting the maximum power out of it. The additional charging system includes the Big 3 Upgrade as well as adding an AGM or Lithium car audio battery. All of our amplifiers are AGE tested for an hour before going into stock.
Our Q1-2200.2 amplifier is the BIG BROTHER TO THE Q1-1200D with the same great design features but with more of the power producing GOOD STUFF to give you 2200 watts of CLEAN UNCLIPPED POWER @ 1% THD.The Q1-2200D is the perfect match for a pair of our HDC3 series subwoofers in a Daily Driver Application. If you want to do a little showing off or burping at competitions use a single Q1-2200.2 per sub.Now if you are a “HARDCORE COMPETITOR” and want to really push those HDC3’s link a pair of the Q1-2200.2’s to a single HDC3 or any other subwoofer of your choice for competition and you’re in for some fun and maybe some smoke from your subs if you’re not careful. If you burn a coil or fold a cone don’t say we didn’t warn you. (We do not warranty burnt or open coils or competition use of subwoofers and amplifiers)
- The Q1-2200.2 is fully stable down to one ohm.
- Daisy Chain connection of two Q1-2200.2’s stable down to two ohms
- Four way protection circuits: Speaker shorts, DC offset, High/Low voltage, Thermal protection
- High current MOSFET switching devices
- 24db/oct slope crossovers, Fully adjustable Low Pass Filter and Subsonic Filter
- Remote Gain Knob Included
|Digital Monoblock 1 ohm stable|
|Variable Low Pass Filter||20Hz-200Hz @ 24dB/Oct|
|Subsonic Filter||10Hz-50Hz @ 24dB/Oct|
|Output Master / Input Slave, 2 amps linkable connection||Yes|
|Clipping Display Led||Yes|
|Signal to Noise Ratio||90dB|
|External Fuse Rating||200 Amps, 400 Amps Linked|
|4 ohm power @ 12V @ 1% THD||770W x 1 @ 4Ω
|1 ohm power @ 14.4V||2300W x 1 @ 1Ω
|1 ohm Power @ 16V||2450W @ 1Ω
|2 ohm Linked Power @ 14.4V @ 1% THD||4600W @ 2Ω
Product specifications subject to change without notice.
WILL NOT STRAP with the Q1-2200.1