0,00 USD

No products in the cart.

Tag: Audio

Amplifier Strapping

Strapping amplifiers is when you link two identical amplifiers for greater power output. When strapped, one amp’s preamp settings control both amps.

Clipping Signals

What is Clipping? The term “clipping signal” refers to the flat shape of a waveform when the amplitude (height) of the wave passes the peak voltage. The power output is much greater than...

Amplifier Wiring and Setting the Gain Level

This guide will help you through wiring and setting gain levels on your car audio amp. Using the instructions below, you should be able to get the most from your system while...

Amp Setup Instructions

Set up your car audio amp for great performance Avoid harmful clipping signals by following these easy instructions: 1. Set LPF to 1-2 O'clock2. Set Subsonic to 10-11 O'clock3. Set Main/Strap switch to “Main”4....

Calculating Port Size

Use simple formulas to calculate your enclosure port size. The Formula for Port Area Port area in square inches = volume in cubic ft x 16For example, 3.4 ft3 x 16 in2 = 54.5...

Subwoofer Displacement

The displacement of a subwoofer is the amount of air space the subwoofer itself takes up. Once the subwoofer is in place, this amount of air is no longer available inside the enclosure....

Most Popular