BG1-750 750 Watt Bagger Series Amp (Ultra Compact)

Soundqubed NEW 2024 BG-Series Bagger/Micro Amplifiers

 

When the brains sat down to look at direction of the markets they are interested in, they saw a focus needed in the Motorcycle/Bagger/Micro amplifier market. 12 months of testing later, and we have created our BG series amplifiers. These amplifiers were developed with the neccesity of space, as its main priority. The BG series comes in a very small case as low as 8.3" long by 3.8" wide and only 1.7" tall. The biggest amp in size for this series, is the BG4-1400 that measures 9.92"L x 3.8" W x 1.7" Tall. We developed a total of 3 amplifiers (for now) for this series; BG4-700, BG4-1400, and BG1-750. We are certain our BG series will change the direction of many enthusiats in the bagger industry. As well as those in the side by side, boats, golf carts, sports cars; you name it, we have an amplifer that can fit it, and increase the sound output. 

Much like all our amplifiers, we wante to maintain the sleek, professional look of a black case with machined logos. We also included lasered end caps that include an aray of our logo and of course, input and output indentification.

Now onto the specifics of the BG1-750. This amplifier has an Ultra-Compact design that measures 9.84" long by 3.8" wide and 1.7" tall. Within this casing, we achieved an ouput level of 750w x 1 channel at 1 ohm. The versatility of this amplifier, is the one you will need when space limits your options. 

 

RMS Power @ 4 Ohms = 425 Watts

RMS Power @ 2 Ohms = 600 Watts

RMS Power @ 1 Ohm = 750 Watts

Frequency Repsonse of 10Hz - 20kHz

Signal to noise ratio of 92dB

Efficiency at 4 ohms is 85%

 

SoundQubed warrants all products to be free from defects in materials and workmanship for normal use and service for a period of time not to exceed 12 months for subwoofers, components, earbuds and coaxial and 12 months for amplifiers from the original date of retail purchase. Parts returned must be determined by SoundQubed to be defective prior to any warranty credit or replacement is issued. SoundQubed’s obligation under warranty shall be limited to repairing or replacing, at its discretion, any part proven defective. The customer must prepay transportation charges. Final determination of the suitability of the products for the use contemplated by the buyer is the sole responsibility of the buyer. Warranties are non transferable. Warranty Exclusions Burnt or open coils Customer abuse or competition use and power in excess of rating Amplifiers used in competition or run below rated ohm loads or voltage Improper wiring, including size/gauge, paths, termination method, and series/parallel configuration SoundQubed shall not be liable for any special, direct, indirect, incidental or consequential damages that might be claimed as a result of the failure of any part, including claims for delay, loss of profits, or labor SoundQubed shall not be liable for any damages or injuries to persons or property resulting from improper installation or misuse of any part subject to this warranty THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED EXTENDING BEYOND THOSE SET FORTH ABOVE